V-Anvil Micrometers Specifications Measuring face Prism angle 60°/108°, carbide tipped spindle hardened anvil (114-204, 114-137 carbide tipped anvil/spindle) Measuring spindle With spindle lock, ø6,35 mm, spindle pitch 0,75 mm Scale Thimble and sleeve satin chrome finish ø18 mm Delivered Including box, setting standard, key 60° For 3-flute cutting tools 108° For 5-flute cutting tools (14.7) 0.5 (14.5) 60° 30.3 114-101, 114-161 22.7 (23.46) ø6.35 60° 114-204 47 17 3 ø18 14.5 ø6.35 27.5 18 60° （a） 114-102 to 114-110 Anvil Measuring wire Spindle Screw tap For 114-101, 114-102, 114-121 Plain anvil model Grooved anvil model Series 114 This V-Anvil Micrometer helps you measure cutting tools and taps. It offers the following benefits: • It measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes. • V-anvils with a centreline groove are available for measuring the pitch diameter of taps by the single-wire method. 114-204 114-121 Metric For 3-flute cutting tools (60°) No. Range [mm] Graduation Max. Permissible Error J MPE Flatness Remarks Measuring force [N] Setting standard a [mm] Mass [g] 114-101 1 - 15 0,01 mm ±4 μm 0,6 μm (spindle), 1,3 μm (anvil) With groove 5-10 167-327 ø 5 mm 0,5 120 114-161 1 - 15 0,01 mm ±4 μm 0,6 μm (spindle), 1,3 μm (anvil) - 5-10 167-327 ø 5 mm 0,5 120 114-204 2,3 - 25 0,01 mm ±4 μm 0,6 μm (spindle), 1,3 μm (anvil) - 5-10 167-327 ø 5 mm 0,5 290 114-102 10 - 25 0,01 mm ±4 μm 0,6 μm (spindle), 1,3 μm (anvil) With groove 5-10 167-328 ø 10 mm 6,2 280 114-162 10 - 25 0,01 mm ±4 μm 0,6 μm (spindle), 1,3 μm (anvil) - 5-10 167-328 ø 10 mm 6,2 280 114-103 25 - 40 0,01 mm ±5 μm 0,6 μm (spindle), 1,3 μm (anvil) - 5-10 167-329 ø 25 mm 19,14 400 114-104 40 - 55 0,01 mm ±6 μm 0,6 μm (spindle), 1,3 μm (anvil) - 5-10 167-330 ø 40 mm 32,13 465 114-105 55 - 70 0,01 mm ±6 μm 0,6 μm (spindle), 1,3 μm (anvil) - 5-10 167-331 ø 55 mm 45,12 675 114-106 70 - 85 0,01 mm ±7 μm 0,6 μm (spindle), 1,3 μm (anvil) - 5-10 167-332 ø 70 mm 58,11 910 114-107 85 - 100 0,01 mm ±7 μm 0,6 μm (spindle), 1,3 μm (anvil) - 5-10 167-333 ø 85 mm 71,1 1160 114-108 100 - 115 0,01 mm ±8 μm 0,6 μm (spindle), 1,3 μm (anvil) - 5-10 167-334 ø 100 mm 84,1 1480 114-109 115 - 130 0,01 mm ±8 μm 0,6 μm (spindle), 1,3 μm (anvil) - 5-10 167-335 ø 115 mm 97,09 2080 114-110 130 - 145 0,01 mm ±9 μm 0,6 μm (spindle), 1,3 μm (anvil) - 5-10 167-336 ø 130 mm 110,1 2880 Metric For 5-flute cutting tools (108°) No. Range [mm] Graduation Max. Permissible Error J MPE Flatness Remarks Measuring force [N] Setting standard Mass [g] 114-137 2,3 - 25 0,01 mm ±4 μm 0,6 μm (spindle), 1,3 μm (anvil) - 5-10 167-327 ø 5 mm 220 114-121 5 - 25 0,01 mm ±4 μm 0,6 μm (spindle), 1,3 μm (anvil) With groove 5-10 167-327 ø 5 mm 255 114-165 5 - 25 0,01 mm ±4 μm 0,6 μm (spindle), 1,3 μm (anvil) - 5-10 167-327 ø 5 mm 255 114-122 25 - 45 0,01 mm ±5 μm 0,6 μm (spindle), 1,3 μm (anvil) - 5-10 167-329 ø 25 mm 400 114-123 45 - 65 0,01 mm ±6 μm 0,6 μm (spindle), 1,3 μm (anvil) - 5-10 167-331 ø 55 mm 540 114-124 65 - 85 0,01 mm ±7 μm 0,6 μm (spindle), 1,3 μm (anvil) - 5-10 167-332 ø 70 mm 760 All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon. 87
RkJQdWJsaXNoZXIy MTU4ODc4MA==