Formtracer Extreme SV-C4500CNC HYBRID Type 1 Series 525 - Surface and Contour Measuring Instrument This measuring system is equipped with a surface roughness detector, a contour detector and a confocal chromatic point sensor (CPS) employing axial chromatic aberration. The Formtracer Extreme SV-C4500CNC Hybrid Type 1 offers you the following benefits: • Powerful as three separate fully CNC instruments. • High accurate fully CNC surface and contour measuring instrument. • Non-contact and contact measurement combined in one instrument. • Two machine types with different CPS sensors available, depending on measuring range and resolution. • Drive speed of up to 200 mm/s in all axes. • Vibration isolator as standard. SV-4500CNC Hybrid Type Surface roughness drive unit Contour drive unit CPS sensor drive unit No. Model Roughness Contour Non-contact 525-676-12 Type 1A 0,75 mN Dual contour stylus CPS2525 525-677-12 Type 1B 0,75 mN Dual contour stylus CPS0517 Specifications Vertical travel Z2 = 500 mm Measuring range X= 200 mm Y= 200 mm Contour: Z1= 60 mm Roughness: Z1= 800 μm; 80 μm; 8 μm (up to 2,4 mm with an optional stylus) mm Measuring speed 0,02 - 2 mm/s Accuracy Contour detector: X= (8 +4L/2000) μm [ L: Drive length (mm)] Contour Z1= (8 + [2H]/ 1000) μm [ H: Measurement height from the horizontal position (mm)] Z2=(3,5 + 15H/1000) μm Software FORMTRACEPAK • Allows control of all axis, motor-driven Yaxis table and rotary table for efficient automated measurement. • Contour evaluation can be performed using analysis of level differences, angle, pitch, area and contour tolerancing as standard. • An inspection certificate can be created by setting the print format as required. Non-contact detector Measuring range CPS0517 = 100 μm CPS2525 = 1200 μm Working distance CPS0517 = 12 mm CPS2525 = 21 mm Resolution CPS0517 = 5 nm CPS2525 = 25 nm All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, 480 All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
RkJQdWJsaXNoZXIy MTU4ODc4MA==