NC Linear Scales ABS AT1100 Electromagnetic induction Absolute Scale • New design to avoid infiltration of coolant and dust using a rubber highly resistant to coolant attack for highest reliability • Widest sensor-to-scale air gap for electromagnetic induction scales of 0,4 mm - 4 times wider than conventional optical or electromagnetic encoder • Increased air gap reduces the likelihood of failure due to the accumulation of contaminants and is one of the world’s largest to be found in a machine tool scale • De facto standard frame multipoint mounting method has been adopted to provide high resistance to vibration and shock • 6 times higher accuracy than previous scales due to improved signal processing technology • Compatible with the high-speed serial interface from leading machine-tool companies, allowing direct connection to an NC controller Specifications Detection Method Electromagnetic induction Maximum effective range 3040 mm Accuracy 3+5L/1000) μm L= 140 to 2040 mm (5+5L/1000) μm L= 2240 to 3040 mm Cross section 85 x 37mm Response speed 3 m/s Resolution 0.05 μm Compatible interface FANUC, Mitsubishi, Siemens, Mitutoyo Refer to the NC System leaflet for more details NC Linear Scales ABS AT1300 Absolute Scale Unit (Slim Type) • High-rigidity (S-type) and high-accuracy (H-type) version available • Outstanding resistance to contamination compared to conventional optical types by using a new detection principle • Features a new coolant-proof design incorporating a high-performance rubber seal to provide higher reliability in the harsh factory environment. • Delivers high accuracy and the outstanding resolution of 0,001 μm, the bestin-class in absolute scales. • Allows space-saving design thanks to a slim form. (AT500-S and AT500-H are compatible with each other in installation.) • Supports the interfaces of various manufacturers allowing a variety of system configurations S-Type H-Type Specifications Detection Method Optical, Transmission double telecentric Maximum effective range 100 to 2200 mm S-Type/ 100 to 1000mm H-Type Cross section 66 x 23 mm / 24 x 65 mm Response speed 3000 mm/s Resolution 0,001/0,01/0,05 μm Compatible interface Fanuc, Mitsubishi, Mitutoyo Refer to the NC System leaflet for more details All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, 392 All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.
RkJQdWJsaXNoZXIy MTU4ODc4MA==