DRO Extension cables selection guide AT103 1 2 2 m / 5 m / 7 m 2 m / 5 m / 7 m AT113 AT715 3 m / 5 m / 7 m / 10 m / 15 m 3 m / 5 m 0.3 m 3.5 m / 5 m 2 m / 5 m / 7 m Overview of NC Linear Scales System Model Reference Absolute Output signal cycle of Signal unit No. of Resolution Maximum response Minimum edge point function sinusoidal signal (µm) divisions (µm) speed* 1 (mm/s) interval* 2 (ns) ST36B 400 0.01 70 ST36C - 200 0.02 150 (ST36A) Yes - 4 (PSU-200) 125 80 0.05 360 (ST36D) 40 0.1 720 400 0.05 450 C 200 0.1 900 ST46-EZA Yes - 20 - 40 0.5 2600 100 20 1 2600 J 4 5 2600 ABS ST700 - Yes - - - 0.1 5000 - 0.001 8000* 3 ABS ST1300 - Yes - - - - 0.01 200 0.1 800 100 0.2 1600 80 0.25 40 0.5 AT113 Yes - 20 PSU-200 125 20 1 2000 10 2 8 2.5 4 5 C 200 0.1 710 100 0.2 1400 125 � 40 0.5 E AT211 Yes - 20 - J 20 1 250 2000 8 2.5 500 4 5 1000 ABS AT1100 - Yes - - - 0.05 3000 - 0.001 ABS AT1300 - Yes - - - 0.01 3000 - 0.05 *1 Maximum response speed of pulse output type uses the logicalvalue (IC specification) with a margin of about 10%, and is limited depending on the scale response speed and resolution. *2 For information on minimum edge interval, see "Explanation of Terms" on page 74. The guaranteed value for minimum edge interval is +0%, -10%. For some models, values other than shown above can also be selected. *3 lt depends on the interface. All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon. 387
RkJQdWJsaXNoZXIy MTU4ODc4MA==