Fine Spindle Feed 0,25 mm / rev Micrometer Heads 6,5 mm and 13 mm Range Specifications Measuring face Hardened steel (>60 HRC) Series 148 - Fine spindle feed of 0,25/rev These micrometer heads are a standard, small-sized type with a 6,5 mm and 13 mm measuring range. They offer the following benefits: • Fine spindle feed of 0,25 mm/rev for fine adjustment. 148-132-10 148-133-10 148-322-10 148-323-10 Metric No. Range [mm] Graduation Max. Permissible Error J MPE Spindle end Spindle pitch [mm] Stem Ø [mm] Stem Fixture thickness for clamp nut [mm] Mass [g] 148-132-10 0 - 13 0,01 mm ±2 μm Spherical (SR4) 0,25 9,5 mm Plain 30 148-133-10 0 - 13 0,01 mm ±2 μm Spherical (SR4) 0,25 9,5 mm w/ clamp nut 6 35 148-322-10 0 - 6,5 0,01 mm ±2 μm Spherical (SR4) 0,25 9,5 mm Plain 30 148-323-10 0 - 6,5 0,01 mm ±2 μm Spherical (SR4) 0,25 9,5 mm w/ clamp nut 6 35 0 5 20 Set Screw 27 ø5 9.5 ø13 (14) 31.5 (44.5) 3.5 SR4 ø9.5 0 -0.009 148-132-10 Nut M9.5×0.5 Set Screw 20 5 0 3.5 (44.5) 31.5 (14) ø13 ø5 27 4 ø14 9.5 SR4 ø9.5 0 -0.009 148-133-10 5 20 0 Set Screw 23.5 (30) (12) 18.5 9.5 ø6.35 ø15 SR4 ø9.5 0 -0.009 148-322-10 5 0 20 Nut M9.5×0.5 Set Screw ø14 ø6.35 9.5 4 18.5 ø15 (30) 23.5 3.5 (12) SR4 ø9.5 0 -0.009 148-323-10 (): with spindle full retracted All products to be sold to commercial customers. Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon. 113
RkJQdWJsaXNoZXIy MTU4ODc4MA==